Dual Zone Kiln Combination Kit

Item name:

Paragon Kilns – Dual Zone Kiln Combination Kit – Two 21″ Front Loading Kilns

Item ID:

Item Description:

**DROP SHIPPED ONLY. Lead time is typically 3-5 weeks but please get in touch with us with your power requirements so that we can get as accurate of a lead time as possible from Paragon. Paragon knows that you’re busy and that you need to get work done while you’re getting work done. The top kiln comes with a guillotine door, and the bottom kiln has a swing door. The Dual Zone Kiln Combination Kit is made for the production shop in mind with custom wiring. Each kiln needs 40 amps. The stand is made of steel to ensure you’ve got the right space for your kilns. Machine shops save time with a furnace at their disposal. You will no longer send a die out for heat treating, wait for its return, and then send it out again for additional heat treating. The door swings open with one-handed operation. The PMT-21 furnace is insulated with refractory firebrick. The elements are mounted in dropped, recessed grooves machined into the firebrick. Paragon invented this type of groove in 1952. This groove protects the element for long life and low maintenance. Elements are simple to replace because they’re exposed rather than embedded. You can thread new elements into place following clear instructions in the manual. The firing chamber is protected by a steel case painted in high-temperature blue. A built-in stand lifts the firing chamber safely off your worktable, so no extra stand is needed. The door is mounted with a heavy-duty hinge for smooth opening. A micro-switch shuts off the power to the elements when the door is opened. We use high temperature wire in the switch box for long life. A heat shield, mounted between the switch box and furnace, helps keep the switch box components cool even during extended operation. To further dissipate heat, the switch box is extra large and generously louvered. Each furnace comes with a cord and plug for immediate installation and a one year warranty. Your furnace includes a wiring diagram, programming instructions, and heat treating manual. The manual gives you basic heat treating instructions for D2, 440C, ATS 34 and 154 CM. The manual is written in plain English for the beginner. The thermocouple senses temperature inside the kiln. It is the small rod that extends into the firing chamber. The _‚Äù wide Type-K, 14-gauge, exposed-tip thermocouple is made with special-limit wire for superior accuracy. The exposed tip gives the controller a fast response time for even temperatures during holds. The thermocouple is made in America to our exacting standards. Paragon’s warranty is not affected by the frequency of use. You can fire your new kiln every day if you want, even in commercial settings. That will not affect on the warranty period. All warranty claims are submitted to Paragon and fulfilled by Paragon.

Dimensions and Specifications:

Max Temperature: 2350 F(1287C) Amps: 40 Phase: 1 Watts: 9600 Nema: 6-50R Control Type: Sentry Digital 12-Key Non-Ceramic Voltage: 240 Hertz: 60 Kiln Type: Front Loading Square Sides: 4 Chamber Volume: 3.30 Cu. FT. (93.45 litres) Chamber Width: 21.00″ (533mm) Chamber Depth: 21.00‚Äù (533mm) Chamber Height: 13.00‚Äù (330mm) Shipped Size: 44.00‚Äù W x 35.00″ D x 32.00″ H (Inches) 1118mm W x 991mm D x 813mm H Ship Weight: 424.00 Lbs. (192.33 Kg.)

How It’s Sold:

This item is sold individually and ships via freight.

Optional Gas Injection Flow Meter

During heat treating, scale forms on the surface of the steel. One way to eliminate most scaling is to wrap the steel in stainless steel foil. An easier way is to install the gas injection flow meter on your furnace. It is available as either an add-on kit or as a furnace with the meter installed. The meter regulates the flow of an inert gas, such as argon, inside the furnace. The gas displaces the oxygen to prevent most scaling.